Valley Odyssey Brake Controller

Odyssey Brake Controller Features:

The Odyssey Brake Controls is polarity protected. If the positive (+) and negative (-) power leads are reversed, the unit isolates itself from the power input and protects itself from a short circuit.
When applying the trailer brakes by utilizing the manual slider alone, the Odyssey will supply power the the trailers brake lights.
To protect your trailer's braking system, the Odyssey Brake Control, when fully stopped with the brake pedal applied (i.e. Railroad crossings or other traffic standstills), will reduce it's output power to the trailer brakes. This helps to protect the trailer brake magnets from overheating and the possibility of glazing the trailer brakes.
The Odyssey Brake Control is designed to operate equally well in forward and reverse (backing) based on the deceleration of the vehicle and trailer.
Leveling of the Odyssey Brake Control is not required. This proportional unit is designed to operate in a wide range of positions.
Due to it's advanced proportional circuitry, the Odyssey Brake Control is NOT recommended for use on trailers with electronically activated hydraulic braking systems.
The Odyssey Brake Control can be mounted in an unlimited number of positions, making it easily and comfortably accessible from the driver's position of most any tow vehicle.
Instructions